Welcome to Kesheng Products Limited
当前位置 :
How to choose the model and size of ceramic rings of pad printing machine
来源: | 作者:Jack Chen | 发布时间: 2020-07-30 | 294 次浏览 | 分享到:

How to choose the model and size of ceramic rings of pad printing machine?

As a vulnerable component, ceramic rings need to be replaced after a period of use, and there are many models available.
If you choose the wrong model, it may not be able to be installed properly into your existing inkcup of pad printing machine.
Below are some suggestions for selecting specific models and sizes

1. Know the model of the inkcup of your pad printing machine and ask the original supplier to provide the size or drawing of the ceramic ring.

This is quite difficult, sometimes you don't want the original inkcup supplier to know that you have chosen a high-quality and cheap substitute.

2. To measure the size of the removed ceramic ring, it is first necessary to clean the ceramic rings to avoid any remaining ink affecting the measurement results.

Specifically measure the outer diameter, Inner diameter, Height and angle of the blade.

3. Alternatively, you can provide the name of the inkcup supplier or a photo of the inkcup of your pad printing machine, and we will provide specific model recommendations.
After purchasing samples for testing, you can proceed with bulk purchases.


上一篇:
下一篇: